Tag Archive: galvanized steel posts

  1. New Product Design increases Corrosion Protection

    Leave a Comment

    Our latest product development on our TetraWal range of retaining wall galvanized steel posts, joiner systems and cleats involves a redesign to increase the surface area that is hot dip galvanized, thereby increasing the corrosion protection and service life of a broader range of TetraWal components.

    We have previously compared retaining wall products that have been “Batch Galvanized” as is the TetraWal range, to “Continuously Galvanized Sheet” posts which are thinner in all aspects. Highlighting the impact of downgraded welding practices on the latter, that reduce zinc thicknesses on theses posts, thereby reducing the corrosion protection of the steel and the years of serviceable life for HDG steel components. Now we’re taking TetraWal’s high quality products one step further and redesigning any TetraWal components that have previously featured plate-on-plate elements.

    Plate-on-plate elements are fabricated prior to galvanizing and inhibit the ability of molten zinc to penetrate the joins and flow between the two surfaces to consistently cover all faces of the steel. As a result, internal surfaces are not galvanized to a consistent thickness and may not be galvanized at all. Although the zinc coating is cathodic and protects the steel from corrosion, those internal surfaces will bleed rust over time as the uncoated steel slowly corrodes.

    Our redesign adapts fabrication to create a gap between plates of at least 2mm. This allows our pre-treatment process to adequately clean the steel between the plates, ensures appropriate venting and hot dip galvanizes the inner surfaces effectively, without compromising weld strength along the joins. This redesign ensures all facings of TetraWal retaining wall steel joiner posts are 100% galvanized to AS/NZS4680. This delivers a longer service life for TetraWal fence cleats and 90 degree corner sections, equivalent to that of the solid, single steel component C-sections and H-sections within our range.

  2. Great Ocean Road Corrosion Protection

    Leave a Comment

    Geelong Galvanizing provided TetraWal hot dip galvanized steel retaining wall uprights to the Victorian Government’s $53 million hazard mitigation project to protect sections of the 240-kilometre tourist route on the Great Ocean Road.

    Over time, one of the sections on Victoria’s most iconic and scenic stretches of road, between Separation Creek and Wye River has been under threat from bushfires and floods, causing hundreds of landslides and forcing road closures. The project involves urgent repairs including; new rock fall netting, retaining walls and armour stone to prevent erosion by waves and minimise the risks of rockfalls and landslides.

    The concrete retaining wall along the Wye River section of the Great Ocean Road will be extended 25 metres north and dressed in baskets of light basalt rock. Approximately 300 soil nails, in association with a steel grid mesh system, will also be installed to lock down the hillside.

    Hot dip galvanizing provides the highest level of corrosion protection for the steel components used in this project. In an area exposed to severe weather elements including salt air, wind and rain, the long-term corrosion protection of HDG steel ensures the safety of tourists and locals using the road to travel along the Victorian coastline.

  3. TetraWal features in Fence It Magazine

    Leave a Comment

    TetraWal featured in the latest edition of ‘The Fence’, which covers an installation of retaining walls at the new Spavin and Riddell residential estate in Sunbury. Custom TetraWal steel posts were used to create the boundary lines on this estate in Melbourne’s northwest fringe. The project comprises approximately 750 metres of timber retaining walls ranging from 200mm to 2.4 metres in height, supported by steel soldiers and concrete footings. Read about it here http://may2017.thefence.com.au/10/



  4. RetainEase delivers TetraWal to Newcastle

    Leave a Comment

    RetainEase has a new outlet for TetraWal in Newcastle. The team’s knowledge of the building industry in the area and the mines is a great advantage to customers. Couple this with their experience with retaining wall installations and you have the perfect combination for anyone looking for quality galvanized steel posts and concrete sleepers. Visit their showroom and talk to the people who really know what they are talking about @ 1/58 Mitchell Road, Cardiff or call on (02) 4956 5269.

For the Latest Products & Project Shots

Geelong Galvanizing provides a total service solution;
cutting, fabricating, galvanizing and delivering product to your site.